U.S. Economy
A2 Forestry
In
the 1990s, less than 1 percent of the country’s workforce was
involved in the lumber industry, and forestry accounted for less than
0.5 percent of the nation’s gross domestic product (GDP).
Nevertheless, forests represent a crucial resource for U.S. industry.
Forest resources are used in producing housing, fuel, foodstuffs, and
manufactured goods. The United States leads the world in lumber
production and is second in the production of wood for pulp and paper
manufacture. These high production levels, however, do not satisfy
all of the U.S. demand for forest products. The United States is the
world’s largest importer of lumber, most of which comes from
Canada.
When
European settlers first arrived in North America, half of the land on
the continent was covered with forests. The forests of the eastern
and northern portions of the country were fairly continuous.
Beginning with the early colonists, the natural vegetation was
altered drastically as farmers cleared land for crops and pastures,
and cut trees for firewood and lumber. In the north and east,
lumbermen quickly cut all of the valuable trees before moving on to
other locations. Only 10 percent of the original virgin timber
remains. Almost two thirds of the forests that remain have been
classified as commercial resources.
Forests
still cover 23 percent of the United States. The trees in the
nation’s forests contain an estimated 7.1 billion cu m (249.3
billion cu ft) of wood suitable for lumber. Private individuals and
businesses, including farmers, lumber companies, paper mills, and
other wood-using industries, own about 73 percent of the commercial
forestland. Federal, state, and local governments own the remaining
27 percent.
Softwoods
(wood harvested from cone-bearing trees) make up about three-fourths
of forestry production and hardwoods (wood harvested from
broad-leafed trees) about one-fourth. Nearly half the timber output
is used for making lumber boards, and about one-third is converted to
pulpwood, which is subsequently used to manufacture paper. Most of
the remaining output goes into plywood and veneer. Douglas fir and
southern yellow pine are the primary softwoods used in making lumber,
and oak is the most important hardwood.
About
half of the nation’s lumber and all of its fir plywood come
from the forests of the Pacific states, an area dominated by
softwoods. In addition to the Douglas fir forests in Washington and
Oregon, this area includes the famous California redwoods and the
Sitka spruce along the coast of Alaska. Forests in the mountain
states of the West cover a relatively small area, yet they account
for more than 10 percent of the nation’s lumber production.
Ponderosa pine is the most important species cut from the forests of
this area.
Forests
in the South supply about one-third of the lumber, nearly
three-fifths of the pulpwood, and almost all the turpentine, pitch,
resin, and wood tar produced in the United States. Longleaf,
shortleaf, loblolly, and slash pine are the most important commercial
trees of the southern coastal plain. Commercially valuable hardwood
trees, such as gum, ash, pecan, and oak, grow in the lowlands along
the rivers of the South.
The Appalachian Highland and parts of the Great Lakes area have excellent hardwood forests. Hickory, maple, oak, and other hardwoods removed from these forests provide fine woods for the manufacture of furniture and other products.
In the 1990s the forest products industry was undergoing a transformation. New environmental requirements, designed to protect wildlife habitat and water resources, were changing forest practices, particularly in the West. The amount of timber cut on federal land declined by 50 percent from 1989 to 1993.
A3 Fishing
The
U.S. waters off the coast of North America provide a rich marine
harvest, which is about evenly split in commercial value between fish
and shellfish. Humans consume approximately 80 percent of the catch
as food. The remaining 20 percent goes into the manufacturing of
products such as fish oil, fertilizers, and animal food.
In
1997 the United States had a commercial fish catch of 5.4 million
metric tons. The value of the catch was an estimated $3.1 billion in
1998. In most years, the United States ranks fifth among the nations
of the world in weight of total catch, behind China, Peru, Chile, and
Japan.
Marine
species dominate U.S. commercial catches, with freshwater fish
representing only a small portion of the total catch. Shellfish
account for only one-sixth of the weight of the total catch but
nearly one-half of the value; finfish represent the remaining share
of weight and value. Alaskan pollock and menhaden, a species used in
the manufacture of oil and fertilizer, are the largest catches by
tonnage. The most valuable seafood harvests are crabs, salmon, and
shrimp, each representing about one-sixth of the total value. Other
important species include lobsters, clams, flounders, scallops,
Pacific cod, and oysters.
Alaska
leads all states in both volume and value of the catch; important
species caught off Alaska’s coast include pollock and salmon.
Other leading fishing states, ranked by value, are Louisiana,
Massachusetts, Texas, Maine, California, Florida, Washington, and
Virginia. Important species caught in the New England region include
lobsters, scallops, clams, oysters, and cod; in the Chesapeake Bay,
crabs; and in the Gulf of Mexico, menhaden and shrimp.
Much of the annual U.S. tonnage of commercial freshwater fish comes from aquatic farms. The most important species raised on farms are catfish, trout, salmon, oysters, and crawfish. The total annual output of private catfish and trout farms in the mid-1990s was 235,800 metric tons, valued at more than $380 million. In the 1970s catfish farming became important in states along the lower Mississippi River. Mississippi leads all states in the production of catfish on farms.
A4 Mining
As
a country of continental proportions, the United States has within
its borders substantial mineral deposits. America leads the world in
the production of phosphate, an important ingredient in fertilizers,
and ranks second in gold, silver, copper, lead, natural gas, and
coal. Petroleum production is third in the world, after Russia and
Saudi Arabia.
Mining contributes 1.5 percent of annual GDP and employs 0.5 percent of all U.S. workers. Although mining accounts for only a small share of the nation’s economic output, it was historically essential to U.S. industrial development and remains important today. Coal and iron ore are the basis for the steel industry, which fabricates components for manufactured items such as automobiles, appliances, machinery, and other basic products. Petroleum is refined into gasoline, heating oil, and the petrochemicals used to make plastics, paint, pharmaceuticals, and synthetic fibers.
The
nation’s three chief mineral products are fuels. In order of
value, they are natural gas, petroleum, and coal. In 1996 the United
States produced 23 percent of the world’s natural gas, 21
percent of its coal, and 13 percent of its crude oil. From 1990 to
1995, as the inflation-adjusted prices for these products declined,
the extraction of these fossil fuels declined, increasing U.S.
dependence on foreign sources of oil and natural gas.
The
United States contains huge fields of natural gas and oil. These
fields are scattered across the country, with concentrations in the
midcontinent fields of Texas and Oklahoma, the Gulf Coast region of
Texas and Louisiana, and the North Slope of Alaska. Texas and
Louisiana account for almost 60 percent of the country’s
natural gas production. Today, oil and natural gas are pumped to the
surface, then sent by pipeline to refineries located in all parts of
the nation. Offshore deposits account for 13 percent of total
production. Coal production, important for industry and for the
generation of electric power, comes primarily from Wyoming (29
percent of U.S. production in 1997), West Virginia (18 percent), and
Kentucky (16 percent).
Important metals mined in the United States include gold, copper, iron ore, zinc, magnesium, lead, and silver. Iron ore is found mainly in Minnesota, and to a lesser degree in northern Michigan. The ore consists of low-grade taconite; U.S. deposits of high-grade ores, such as hematite, magnetite, and limonite, have been consumed. Leading industrial minerals include materials used in construction—mainly clays, lime, salt, phosphate rock, boron, and potassium salts. The United States also produces large percentages of the world’s output for a number of important minerals. In 1997 the United States produced 42 percent of the world’s molybdenum, 34 percent of its phosphate rock, 22 percent of its elemental sulfur, 17 percent of its copper, and 16 percent of its lead. Major deposits of many of these minerals are found in the western states.
B Manufacturing
and Energy Sector B1 Manufacturing
The
United States leads all nations in the value of its yearly
manufacturing output. Manufacturing employs about one-sixth of the
nation’s workers and accounts for 17 percent of annual GDP. In
1996 the total value added by manufacturing was $1.8 trillion. Value
added is the price of finished goods minus the cost of the materials
used to make them. Although manufacturing remains a key component of
the U.S. economy, it has declined in relative importance since the
late 1960s. From 1970 to 1995 the number of employees in
manufacturing declined slightly from 20.7 million to 20.5 million,
while the total U.S. labor force grew by more than 46.2 million
people.
One
of the most important changes in the pattern of U.S. industry in
recent decades has been the growth of manufacturing in regions
outside the Northeast and North Central regions. The nation’s
industrial core first developed in the Northeast. This area still has
the greatest number of industrial firms, but its share of these firms
is smaller than in the past. In 1947 about 75 percent of the nation’s
manufacturing employees lived in the 21 Northeast and Midwest states
that extend from New England to Kansas. By the early 1990s, however,
only about one-half of manufacturing employees resided in the same
region. Since 1947, the South’s share of the nation’s
manufacturing workers increased from 19 to 32 percent, and the West’s
share grew from 7 to 18 percent.
In
the North, manufacturing is centered in the Middle Atlantic and East
North Central states, which accounted for 38 percent of the value
added by all manufacturing in the United States in 1996. Located in
this area are five of the top seven manufacturing statesa—New
York, Ohio, Illinois, Pennsylvania, and Michigan—which together
were responsible for approximately 27 percent of the value added by
manufacturing in all states. Important products in this region
include motor vehicles, fabricated metal products, and industrial
equipment. New York, New Jersey, and Pennsylvania specialize in the
production of machinery and chemicals. This area bore the brunt of
the decline in manufacturing’s value of national output, losing
a total of 800,000 jobs from the early 1980s to the early 1990s.
In
the South the greatest gains in manufacturing have been in Texas. The
most phenomenal growth in the West has been in California, which in
the late 1990s was the leading manufacturing state, accounting for
more than one-tenth of the annual value added by U.S. manufacturing.
California dominates the Pacific region, which specializes in the
production of transportation equipment, food products, and electrical
and electronic equipment.
B1a International
Manufacturing
United
States industry has become much more international in recent years.
Most major industries are multinational, which means that they not
only market products in foreign countries but maintain production
facilities and administrative headquarters in other nations. In the
late 1990s, giant U.S. corporations began a wave of international
partnerships, with U.S. companies sometimes merging with foreign
companies.
Beginning in the early 1980s, U.S. companies increasingly produced component parts and even finished goods in foreign countries. The practice of a company sending work to outside factories to reduce production costs is called outsourcing. Foreign outsourcing sends production to countries where labor costs are lower than in the United States. One of the first methods of foreign outsourcing was the maquiladora (Spanish for “mill”) in Mexican border towns. Manufacturers built twin plants, one on the Mexican side and one on the United States side. Companies in the United States sent partially manufactured products into Mexico where labor-intensive plants finished the product and sent it back to the United States for sale. Outsourcing to Mexico became more widespread after the North American Free Trade Agreement went into effect in 1994. Firms in the United States also outsource to many other nations, including South Korea, Indonesia, Malaysia, Jamaica, and the Philippines.
In the 1990s, few products were made entirely within the United States. Although a product may be fabricated in the United States, some component parts may have been produced in foreign countries. Despite outsourcing and the international operations of multinational firms, the United States is still a major producer of thousands of industrial items and has a comparative advantage over most foreign countries in several industrial categories.
B1b Principal
Products
Ranked
by value added by manufacturing, in 1996 the leading categories of
U.S. manufactured goods were chemicals, industrial machinery,
electronic equipment, processed foods, and transportation equipment.
The chemical industry accounted for about 11.1 percent of the overall
annual value added by manufacturing. Texas and Louisiana are leaders
in chemical manufacturing. The petroleum and natural gas produced and
refined in both