an exact location for any length of time. It limits
what molecular machines can do, just as it limits what anything else
can do. Nonetheless, calculations show that the uncertainty principle
places few important limits on how well atoms can be held in place,
at least for the purposes outlined here. The uncertainty principle
makes electron
positions quite fuzzy, and in fact this fuzziness determines the very
size and structure of atoms. An atom as a whole, however, has a
comparatively definite position set by its comparatively massive
nucleus. If atoms didn't stay put fairly well, molecules would not
exist. One needn't study quantum mechanics to trust these
conclusions, because molecular machines in the cell demonstrate that
molecular machines work. Will
the molecular vibrations of heat make molecular machines unworkable
or too unreliable for use?
Thermal vibrations will cause greater problems than will the
uncertainty principle, yet here again existing molecular machines
directly demonstrate that molecular machines can work at ordinary
temperatures. Despite thermal vibrations, the
DNA-copying machinery in some cells makes less than one error in
100,000,000,000 operations. To achieve this accuracy, however, cells
use machines (such as the enzyme DNA polymerase I) that proofread the
copy and correct errors. Assemblers may well need similar
error-checking and error-correcting abilities, if they are to produce
reliable results. ° Will
radiation disrupt molecular machines and render them unusable?
High-energy radiation can break chemical bonds and disrupt molecular
machines. Living cells once again show that solutions exist: they
operate for years by repairing
and replacing radiation-damaged parts. Because individual
machines are so tiny, however, they present small targets for
radiation and are seldom hit. Still, if a system of nanomachines must
be reliable, then it will have to tolerate a certain amount of
damage, and damaged parts must regularly be repaired or replaced.
This approach to reliability is well known to designers of aircraft
and spacecraft. ° Since
evolution
has failed to produce assemblers, does this show that they are either
impossible or useless?
The earlier questions were answered in part by pointing to the
working molecular machinery of cells. This makes a simple and
powerful case that natural law permits small clusters of atoms to
behave as controlled machines, able to build other nanomachines. Yet
despite their basic resemblance to ribosomes, assemblers will differ
from anything found in cells; the things they do - while consisting
of ordinary molecular motions and reactions - will have novel
results. No cell, for example, makes diamond fiber. The idea that new
kinds of nanomachinery will bring new, useful abilities may seem
startling: in all its billions of years of evolution, life
has never abandoned its basic reliance on protein machines. Does
this suggest that improvements are impossible, though? Evolution
progresses through small changes, and evolution of
DNA cannot easily replace
DNA. Since the DNA/RNA/ribosome system is specialized to make
proteins, life has had no real opportunity to evolve an alternative.
Any production manager can well appreciate the reasons; even more
than a factory, life cannot afford to shut down to replace its old
systems. Improved molecular machinery should no more surprise us than
alloy steel being ten times stronger than bone, or copper wires
transmitting signals a million times faster than nerves. Cars
outspeed cheetahs, jets outfly falcons, and computers already
outcalculate head-scratching humans. The future will bring further
examples of improvements on biological evolution, of which
second-generation nanomachines will be but one. In physical terms, it
is clear enough why advanced assemblers will be able to do more than
existing protein machines. They will be programmable like ribosomes,
but they will be able to use a wider range of tools than all the
enzymes in a cell put together. Because they will be made of
materials far more strong, stiff, and stable than proteins, they will
be able to exert greater forces, move with greater precision, and
endure harsher conditions. Like an industrial robot arm - but unlike
anything in a living cell - they will be able to rotate and move
molecules in three dimensions under programmed control, making
possible the precise assembly of complex objects. These advantages
will enable them to assemble a far wider range of molecular
structures than living cells have done. ° Is
there some special magic about life, essential to making molecular
machinery work? One
might doubt that artificial nanomachines could even equal the
abilities of nanomachines in the cell, if there were reason to think
that cells contained some special magic that makes them work. This
idea is called "vitalism."
Biologists have abandoned it because they have found chemical and
physical explanations for every aspect of living cells yet studied,
including their motion, growth, and reproduction. Indeed, this
knowledge is the very foundation of biotechnology. Nanomachines
floating in sterile test tubes, free of cells, have been made to
perform all the basic sorts of activities that they perform inside
living cells. Starting with chemicals that can be made from smoggy
air, biochemists have built working protein machines without help
from cells. R.
B. Merrifield, for example, used chemical techniques to assemble
simple amino acids to make bovine pancreatic ribonuclease,
an enzymatic device that disassembles RNA molecules. Life is special
in structure, in behavior, and in what it feels like from the inside
to be alive, yet the laws of nature that govern the machinery of life
also govern the rest of the universe. ° The
case for the feasibility of assemblers and other nanomachines may
sound firm, but why not just wait and see whether they can be
developed? Sheer
curiosity seems reason enough to examine the possibilities opened by
nanotechnology, but there are stronger reasons. These developments
will sweep the world within ten to fifty years - that is, within the
expected lifetimes of ourselves or our families. What is more, the
conclusions of the following chapters suggest that a wait-and-see
policy would be very expensive - that it would cost many millions of
lives, and perhaps end life on Earth. Is the case for the feasibility
of nanotechnology and assemblers firm enough that they should be
taken seriously? It seems so, because the heart of the case rests on
two well-established facts of science and engineering. These are (1)
that existing molecular machines serve a range of basic functions,
and (2) that parts serving these basic functions can be combined to
build complex machines. Since chemical reactions can bond atoms
together in diverse ways, and since molecular machines can direct
chemical reactions according to programmed instructions, assemblers
definitely are feasible.
Nanocomputers
Assemblers will bring one
breakthrough of obvious and basic importance: engineers will use them
to shrink the size and cost of computer circuits and speed their
operation by enormous factors. With today's bulk technology,
engineers make patterns on silicon chips by throwing atoms and
photons at them, but the patterns remain flat and molecular-scale
flaws are unavoidable. With assemblers, however, engineers will build
circuits in three dimensions, and build to atomic precision. The
exact limits of electronic technology today remain uncertain because
the quantum behavior of electrons in complex networks of tiny
structures presents complex problems, some of them resulting directly
from the uncertainty principle. Whatever the limits are, though, they
will be reached with the help of assemblers. The fastest computers
will use electronic effects, but the smallest may not. This may seem
odd, yet the essence of computation has nothing to do with
electronics. A digital computer is a collection of switches able to
turn one another on and off. Its switches start in one pattern
(perhaps representing 2 + 2), then switch one another into a new
pattern (representing 4), and so on. Such patterns can represent
almost anything. Engineers build computers from tiny electrical
switches connected by wires simply because mechanical switches
connected by rods or strings would be big, slow, unreliable, and
expensive, today. The idea of a purely mechanical computer is
scarcely new. In England during the mid-1800s, Charles
Babbage invented a mechanical computer built of brass gears; his
co-worker Augusta
Ada, the Countess of Lovelace, invented computer programming.
Babbage's endless redesigning of the machine, problems with accurate
manufacturing, and opposition from budget-watching critics (some
doubting the usefulness of computers!), combined to prevent its
completion. In this tradition, Danny Hillis and Brian Silverman of
the MIT Artificial Intelligence
Laboratory built a special-purpose mechanical computer able to
play tic-tac-toe. Yards on a side, full of rotating shafts and
movable frames that represent the state of the board and the strategy
of the game, it now stands in the Computer
Museum in Boston. It looks much like a large ball-and-stick
molecular model, for it is built of Tinkertoys. Brass gears and
Tinkertoys make for big, slow computers. With components a few atoms
wide, though, a simple mechanical computer would fit within 1/100 of
a cubic micron, many billions of times more compact than today's
so-called microelectronics. Even with a
billion bytes of storage, a nanomechanical computer could fit in a
box a micron wide, about the size of a bacterium. And it would be
fast. Although mechanical
signals move about 100,000 times slower than the electrical
signals in today's machines, they will need to travel only
1/1,000,000 as far, and thus will face less delay. So a mere
mechanical computer will work faster than the electronic whirl-winds
of today. Electronic
nanocomputers will likely be thousands of times faster than
electronic microcomputers - perhaps hundreds of thousands of times
faster, if a
scheme proposed by Nobel Prize-winning physicist Richard Feynman
works out. Increased speed through decreased size is an old story in
electronics.
Disassemblers
Molecular computers will control molecular assemblers,
providing the swift flow of instructions needed to direct the
placement of vast numbers of atoms. Nanocomputers with molecular
memory devices will also store data generated by a process that is
the opposite of assembly.
Assemblers will help engineers
synthesize things; their relatives, disassemblers,
will help scientists and engineers analyze things.
The case for assemblers rests on the
ability of enzymes and chemical reactions to form bonds, and of
machines to control the process. The case for disassemblers rests on
the ability of enzymes and chemical reactions to break bonds, and of
machines to control the process. Enzymes, acids, oxidizers, alkali
metals, ions,
and reactive groups of atoms called free
radicals - all can break bonds and remove groups of atoms.
Because nothing is absolutely immune to corrosion, it
seems that molecular tools will be able to take anything apart, a few
atoms at a time.
What is more, a nanomachine could (at need or
convenience) apply mechanical force as well, in effect prying groups
of atoms free.
A nanomachine able to do this, while
recording what it removes layer by layer, is a
disassembler.
Assemblers, disassemblers, and nanocomputers will work together.
For example, a nanocomputer
system will be able to direct the disassembly of an object, record
its structure, and then direct the assembly of perfect copies, And
this gives some hint of the power of nanotechnology.
The World Made New
Assemblers will take years to emerge,
but their emergence seems almost inevitable: Though the path to
assemblers has many steps, each step will bring the next in reach,
and each will bring immediate rewards. The first steps have already
been taken, under the names of "genetic engineering" and
"biotechnology." Other paths to assemblers seem possible.
Barring worldwide destruction or worldwide controls, the technology
race will continue whether we wish it or not. And as advances in
computer-aided design speed the development of molecular tools, the
advance toward assemblers will quicken. To have any hope of
understanding our future, we must understand the consequences of
assemblers, disassemblers, and nanocomputers. They promise to bring
changes as profound as the industrial revolution, antibiotics, and
nuclear weapons all rolled up in one massive breakthrough. To
understand a future of such profound change, it makes sense to seek
principles of change that have survived the greatest upheavals of the
past. They will prove a useful guide.
Если Вам нужна помощь с академической работой (курсовая, контрольная, диплом, реферат и т.д.),
обратитесь к нашим специалистам. Более 90000 специалистов готовы Вам помочь.
Бесплатные корректировки и доработки. Бесплатная оценка стоимости работы.
Поможем написать работу на аналогичную тему
Получить выполненную работу или консультацию специалиста по вашему учебному
проекту
Нужна помощь в написании работы?
Мы - биржа профессиональных авторов (преподавателей и доцентов вузов). Пишем статьи РИНЦ, ВАК, Scopus.
Помогаем в публикации. Правки вносим бесплатно.