The Comparative Analysis Of The History Of The Computer Science And The Computer Engineering In The USA And Ukraine
New 16-bit expansion slots meant new (and faster) expansion cards but maintained downward compatibility with old 8-bit cards. These hardware changes and new high-density 1.2-MB floppy drives meant a new version of PC-DOS (the dreaded 3.0).
The price for an AT with 512 KB of RAM, a serial/parallel adapter, a high-density floppy drive, and a 20-MB hard drive was well over $5000 - but much less than what the pundits expected.
Commondore Amiga 1000
The Amiga introduced the world to multimedia. Although it cost only $1200, the 68000-based Amiga 1000 did graphics, sound, and video well enough that many broadcast professionals adopted it for special effects. Its sophisticated multimedia hardware design was complex for a personal computer, as was its multitasking, windowing OS.
Compaq Deskrpo 386
While IBM was busy developing (would “wasting time on” be a better phrase?) proprietary Micro Channel PS/2 system, clone vendors ALR and Compaq wrestled away control of the x86 architecture and introduced the first 386-based systems, the Access 386 and Deskpro 386. Both systems maintained backward compatibility with the 286-based AT.
Compaq's Deskpro 386 had a further performance innovation in its Flex bus architecture. Compaq split the x86 external bus into two separate buses: a high-speed local bus to support memory chips fast enough for the 16-MHz 386, and a slower I/O bus that supported existing expansion cards.
Apple Macintosh II
When you first looked at the Macintosh II, you may have said, “But it looks just like a PC. ”You would have been right. Apple decided it was wiser to give users a case they could open so they could upgrade it themselves. The monitor in its 68020-powered machine was a separate unit that typically sat on top of the CPU case.
Next Nextstation
UNIX had never been easy to use , and only now, 10 years later, are we getting back to that level. Unfortunately, Steve Job's cube never developed the software base it needed for long-term survival. Nonetheless, it survived as an inspiration for future workstations.
Priced at less than $10,000, the elegant Nextstation came with a 25-MHz 68030 CPU, a 68882 FPU, 8 MB of RAM, and the first commercial magneto-optical drive (256-MB capacity). It also had a built-in DSP (digital signal processor). The programming language was object-oriented C, and the OS was a version of UNIX, sugarcoated with a consistent GUI that rivaled Apple`s.
NEC UltraLite
Necks UltraLite is the portable that put subnotebook into the lexicon. Like Radio Shack's TRS-80 Model 100, the UltraLite was a 4-pounder ahead of its time. Unlike the Model 100, it was expensive (starting price, $2999), but it could run MS-DOS. (The burden of running Windows wasn't yet thrust upon its shoulders.)
Fans liked the 4.4-pound UltraLite for its trim size and portability, but it really needed one of today's tiny hard drives. It used battery-backed DRAM (1 MB, expandable to 2 MB) for storage, with ROM-based Traveling Software's LapLink to move stored data to a desk top PC.
Foreshadowing PCMCIA, the UltraLite had a socket that accepted credit-card-size ROM cards holding popular applications like WordPerfect or Lotus 1-2-3, or a battery-backed 256-KB RAM card.
Sun SparcStation 1
It wasn't the first RISK workstation, nor even the first Sun system to use Sun's new SPARC chip. But the SparcStation 1 set a new standard for price/performance, churning out 12.5 MIPS at a starting price of only $8995 - about what you might spend for a fully configured Macintosh. Sun sold lots of systems and made the words SparcStation and workstation synonymous in many peoples minds.
The SparcStation 1 also introduced S-Bus, Sun's proprietary 32-bit synchronous bus, which ran at the same 20-MHz speed as the CPU.
IBM RS/6000
Sometimes, when IBM decides to do something, it does it right.(Other times... Well, remember the PC jr.?)The RS/6000 allowed IBM to enter the workstation market. The RS/6000`s RISK processor chip set (RIOS) racked up speed records and introduced many to term suprscalar. But its price was more than competitive. IBM pushed third-party software support, and as a result, many desktop publishing, CAD, and scientific applications ported to the RS/6000, running under AIX, IBM's UNIX.
A shrunken version of the multichip RS/6000 architecture serves as the basis for the single-chip PowerPC, the non-x86-compatible processor with the best chance of competing with Intel.
Apple Power Macintosh
Not many companies have made the transition from CISC to RISK this well. The Power Macintosh represents Apple`s well-planned and successful leap to bridge two disparate hardware platforms. Older Macs run Motorola's 680x0 CISK line, which is running out of steam; the Power Macs run existing 680x0-based applications yet provide Power PC performance, a combination that sold over a million systems in a year.
IBM ThinkPad 701C
It is not often anymore that a new computer inspires gee-whiz sentiment, but IBM's Butterfly subnotebook does, with its marvelous expanding keyboard. The 701C`s two-part keyboard solves the last major piece in the puzzle of building of usable subnotebook: how to provide comfortable touch-typing.(OK, so the floppy drive is sill external.)
With a full-size keyboard and a 10.4-inch screen, the 4.5-pound 701C compares favorably with full-size notebooks. Battery life is good, too.
The development of computers in ukraine and the former USSR
The government and the authorities had paid
serious attention to the development of the computer industry right
after the Second World War. The leading bodies considered this task
to be one of the principal for the national economy.
Up to the
beginning of the 1950s there were only small productive capacities
which specialized in the producing accounting and account-perforating
(punching) machines. The electronic numerical computer engineering
was only arising and the productive capacities for it were close to
the naught.
The first serious steps in the development of
production base were made initially in the late 1950s when the work
on creating the first industry samples of the electronic counting
machines was finished and there were created M-20, “Ural-1”,
“Minsk-1”, which together with their semi-conductor
successors (M-220, “Ural-11-14”, “Minsk-22”
and “Minsk-32”) created in the 1960s were the main ones
in the USSR until the computers of the third generation were put into
the serial production, that is until the early 1970s.
In the 1960s
the science-research and assembling base was enlarged. As the result
of this measures, all researches connected with creating and putting
into the serial production of semi-conductor electronic computing
machines were almost finished. That allowed to stop the production of
the first generation machines beginning from the 1964.
Next
decades the whole branch of the computer engineering had been
created. The important steps were undertaken to widen the productive
capacities for the 3d
generation machines.
Kiev
the homecity of mesm
MESM was conceived by S.A.Lebedev to be a
model of a Big Electronic Computing Machine (BESM). At first it was
called the Model of
the Big Electronic Computing Machine, but ,later, in the process of
its creation there appeared the evident expediency of transforming it
in a small computer. For that reason there were added: the
impute-output devices, magnetic drum storage, the register capacity
was enhanced; and the word “Model”
was changed for “Malaya”
(Small).
S.A.Lebedev was proposed to head the Institute of
Energetics in Kiev. After a year; when the Institute of was divided
into two departments: the electronical one and the department of
heat-and-power engineering, Lebedev became the director of the first
one. He also added his laboratory of analogue computation to the
already existing ones of the electronical type. At once he began to
work on computer science instead of the usual, routine researches in
the field of engineering means of stabilization and structures of
automated devices. Lebedev was awarded the State Prize of the USSR.
Since autumn 1948 Lebedev directed his laboratory towards creating
the MESM. The most difficult part of the work was the practical
creation of MESM. It might be only the many-sided experience of the
researches that allowed the scientist to fulfill the task perfectly;
whereas one inaccuracy was made: the hall at the ground-floor of a
two-storied building was assigned for MESM and when, at last, the
MESM was assembled and switched on, 6,000 of red-hot electronic lamps
created the “tropics” in the hall, so they had to remove
a part of the ceiling to decrease the temperature.
In autumn 1951
the machine executed a complex program rather stabile.
ТНЕ
MESM WITH SOME OF THE PERSONAL (KIEV, 1951)
Finally all the tests
were over and on December, 15 the MESM was put into operation.
If
to remember those short terms the MESM was projected, assembled, and
debugged - in two years - and taking into consideration that only 12
people (including Lebedev) took part in the creating who were helped
by 15 engineers we shall see that S.A.Lebedev and his team
accomplished a feat (200 engineers and many workers besides 13 main
leaders took part in the creation of the first American computer
ENIAC).
As life have showed the foundations of the
computer-building laid by Lebedev are used in modern computers
without any fundamental changes. Nowadays they are well known:
such devices an arithmetic and memory input-output and control ones should be a part of a computer architecture;
the program of computing is encoded and stored in the memory as numbers;
the binary system should be used for encoding the numbers and commands;
the computations should be made automatically basing on the program stored in the memory and operations on commands;
besides arithmetic, logical operations are used: comparisons, conjunction, disjunction, and negation;
the hierarchy memory method is used;
the numerical methods are used for solving the tasks.
The main fault of The 70s
or
the years of
“might-have-been hopes”
The great accumulated experience in
creating computers, the profound comparison of our domestic
achievements with the new examples of foreign computer technique
prompted the scientists that it is possible to create the computing
means of new generation meeting the world standards. Of that opinion
were many outstanding Ukrainian scientists of that time - Lebedev,
Dorodnitsin, Glushkov and others. They proceeded from quite a
favorable situation in the country.
The computerization of
national economy was considered as one of the most essential tasks.
The decision to create the United system of computers - the machines
of new generation on integrals.
The USA were the first to create
the families of
computers. In 1963-64 the IBM Company worked out the IBM-360 system.
It comprised the models with different capacities for which a wide
range of software was created.
A decision concerning the third
generation of computers (their structure and architecture) was to be
made in the USSR in the late 60s.
But instead of making the
decision based on the scientific grounds concerning the future of the
United system of computers the Ministry of Electronic Industry issued
the administrative order to copy the IBM-360 system. The leaders of
the Ministry did not take into consideration the opinion of the
leading scientists of the country.
Despite the fact that there
were enough grounds for thinking the 70s would bring new big
progresses, those years were the step back due to the fault way
dictated by the highest authorities from above.
The comparison of the computer development
in the
usa and ukraine
At the time when the computer science was just uprising
this two countries were one of the most noticeably influential. There
were a lot of talented scientists and inventors in both of them. But
the situation in Ukraine (which at that time was one of 15 Republics
of the former USSR) was complicated, on one hand, with the
consequences of the Second World War and, on the other hand, at a
certain period Cybernetics and Computer Science were not
acknowledged. Of cause, later it went to the past, but nevertheless
it played a negative role on the Ukrainian computer development.
It
also should be noticed that in America they paid more attention to
the development of computers for civil and later personal use. But in
Ukraine the attention was mainly focused on the military and
industrial needs.
Another interesting aspect of the Ukrainian
computer development was the process of the 70s when “sovietizing”
of the IBM-360 system became the first step on the way of weakening
of positions achieved by the Soviet machinery construction the first
two decades of its development. The next step that led to the further
lag was the mindless copying by the SU Ministry of Electronic
Industry and putting into production the next American elaborations
in the field of microprocessor equipment.
The natural final stage
was buying in enormous quantities of foreign computers last years and
pressing to the deep background our domestic researches, and
developments, and the computer-building industry on the
whole.
Another interesting aspect of the Ukrainian computer
development was the process of the 70s when the “sovietising”
of the IBM-360 system became the first step on the way of weakening
of positions, achieved by the Soviet machinery construction of the
first two decades of its development. The next step that led to the
further lag was the mindless copying of the next American
elaborations in the field of microprocessor technique by the Ministry
of Computer Industry.
CONCLUSION
Having analyzed the development of computer science in two