Xreferat.com » Рефераты по информатике и программированию » Система криптозащиты в стандарте DES. Система взаимодействия периферийных устройств
Система криптозащиты в стандарте DES. Система взаимодействия периферийных устройств
of
1947, as amended, or the Atomic Energy Act of 1954, as amended.
Federal agencies or departments which use cryptographic devices for
protecting data classified according to either of these acts can use those
devices for protecting unclassified data in lieu of the standard.
Other FIPS approved cryptographic algorithms may be used in addition to, or
in lieu of, this standard when implemented in accordance with FIPS 140-1.
In addition, this standard may be adopted and used by non-Federal Government
organizations. Such use is encouraged when it provides the desired security
for commercial and private organizations.
7. Applications. Data encryption (cryptography) is utilized in various
applications and environments. The specific utilization of encryption and
the implementation of the DES will be based on many factors particular to
the computer system and its associated components. In general, cryptography
is used to protect data while it is being communicated between two points or
while it is stored in a medium vulnerable to physical theft. Communication
security provides protection to data by enciphering it at the transmitting
point and deciphering it at the receiving point. File security provides
protection to data by enciphering it when it is recorded on a storage medium
and deciphering it when it is read back from the storage medium. In the
first case, the key must be available at the transmitter and receiver
simultaneously during communication. In the second case, the key must be
maintained and accessible for the duration of the storage period. FIPS 171
provides approved methods for managing the keys used by the algorithm
specified in this standard.
8. Implementations. Cryptographic modules which implement this standard
shall conform to the requirements of FIPS 140-1. The algorithm specified in
this standard may be implemented in software, firmware, hardware, or any
combination thereof. The specific implementation may depend on several
factors such as the application, the environment, the technology used, etc.
Implementations which may comply with this standard include electronic
devices (e.g., VLSI chip packages), micro-processors using Read Only Memory
(ROM), Programmable Read Only Memory (PROM), or Electronically Erasable Read
Only Memory (EEROM), and mainframe computers using Random Access Memory
(RAM). When the algorithm is implemented in software or firmware, the
processor on which the algorithm runs must be specified as part of the
validation process. Implementations of the algorithm which are tested and
validated by NIST will be considered as complying with the standard. Note
that FIPS 140-1 places additional requirements on cryptographic modules for
Government use. Information about devices that have been validated and
procedures for testing and validating equipment for conformance with this
standard and FIPS 140-1 are available from the National Institute of
Standards and Technology, Computer Systems Laboratory, Gaithersburg, MD
20899.
9. Export Control. Cryptographic devices and technical data regarding them
are subject to Federal Government export controls as specified in Title 22,
Code of Federal Regulations, Parts 120 through 128. Some exports of
cryptographic modules implementing this standard and technical data
regarding them must comply with these Federal regulations and be licensed by
the U.S. Department of State. Other exports of cryptographic modules
implementing this standard and technical data regarding them fall under the
licensing authority of the Bureau of Export Administration of the U.S.
Department of Commerce. The Department of Commerce is responsible for
licensing cryptographic devices used for authentication, access control,
proprietary software, automatic teller machines (ATMs), and certain devices
used in other equipment and software. For advice concerning which agency has
licensing authority for a particular cryptographic device, please contact
the respective agencies.
10. Patents. Cryptographic devices implementing this standard may be covered
by U.S. and foreign patents issued to the International Business Machines
Corporation. However, IBM has granted nonexclusive, royalty-free licenses
under the patents to make, use and sell apparatus which complies with the
standard. The terms, conditions and scope of the licenses are set out in
notices published in the May 13, 1975 and August 31, 1976 issues of the
Official Gazette of the United States Patent and Trademark Office (934 O.G.
452 and 949 O.G. 1717).
11. Alternative Modes of Using the DES. FIPS PUB 81, DES Modes of Operation,
describes four different modes for using the algorithm described in this
standard. These four modes are called the Electronic Codebook (ECB) mode,
the Cipher Block Chaining (CBC) mode, the Cipher Feedback (CFB) mode, and
the Output Feedback (OFB) mode. ECB is a direct application of the DES
algorithm to encrypt and decrypt data; CBC is an enhanced mode of ECB which
chains together blocks of cipher text; CFB uses previously generated cipher
text as input to the DES to generate pseudorandom outputs which are combined
with the plaintext to produce cipher, thereby chaining together the
resulting cipher; OFB is identical to CFB except that the previous output of
the DES is used as input in OFB while the previous cipher is used as input
in CFB. OFB does not chain the cipher.
12. Implementation of this standard. This standard became effective July
1977. It was reaffirmed in 1983, 1988, and 1993. It applies to all Federal
agencies, contractors of Federal agencies, or other organizations that
process information (using a computer or telecommunications system) on
behalf of the Federal Government to accomplish a Federal function. Each
Federal agency or department may issue internal directives for the use of
this standard by their operating units based on their data security
requirement determinations. FIPS 46-2 which revises the implementation of
the Data Encryption Algorithm to include software, firmware, hardware, or
any combination thereof, is effective June 30, 1994. This revised standard
may be used in the interim period before the effective date.
NIST provides technical assistance to Federal agencies in implementing data
encryption through the issuance of guidelines and through individual
reimbursable projects. The National Security Agency assists Federal
departments and agencies in communications security for classified
applications and in determining specific security requirements. Instructions
and regulations for procuring data processing equipment utilizing this
standard are included in the Federal Information Resources Management
Regulation (FIRMR) Subpart 201-8.111-1.
13. Specifications. Federal Information Processing Standard (FIPS) 46-2,
Data Encryption Standard (DES) (affixed).
14. Cross Index.
a. Federal Information Resources Management Regulations (FIRMR) subpart
201.20.303, Standards, and subpart 201.39.1002, Federal Standards.
b. FIPS PUB 31, Guidelines to ADP Physical Security and Risk Management.
c. FIPS PUB 41, Computer Security Guidelines for Implementing the
Privacy Act of 1974.
d. FIPS PUB 65, Guideline for Automatic Data Processing Risk Analysis.
e. FIPS PUB 73, Guidelines for Security of Computer Applications.
f. FIPS PUB 74, Guidelines for Implementing and Using the NBS Data
Encryption Standard.
g. FIPS PUB 81, DES Modes of Operation.
h. FIPS PUB 87, Guidelines for ADP Contingency Planning.
i. FIPS PUB 112, Password Usage.
j. FIPS PUB 113, Computer Data Authentication.
k. FIPS PUB 140-1, Security Requirements for Cryptographic Modules.
l. FIPS PUB 171, Key Management Using ANSI X9.17.
m. Other FIPS and Federal Standards are applicable to the implementation
and use of this standard. In particular, the Code for Information
Interchange, Its Representations, Subsets, and Extensions (FIPS PUB 1-2)
and other related data storage media or data communications standards
should be used in conjunction with this standard. A list of currently
approved FIPS may be obtained from the National Institute of Standards
and Technology, Computer Systems Laboratory, Gaithersburg, MD 20899.
15. Qualifications. The cryptographic algorithm specified in this standard
transforms a 64-bit binary value
1947, as amended, or the Atomic Energy Act of 1954, as amended.
Federal agencies or departments which use cryptographic devices for
protecting data classified according to either of these acts can use those
devices for protecting unclassified data in lieu of the standard.
Other FIPS approved cryptographic algorithms may be used in addition to, or
in lieu of, this standard when implemented in accordance with FIPS 140-1.
In addition, this standard may be adopted and used by non-Federal Government
organizations. Such use is encouraged when it provides the desired security
for commercial and private organizations.
7. Applications. Data encryption (cryptography) is utilized in various
applications and environments. The specific utilization of encryption and
the implementation of the DES will be based on many factors particular to
the computer system and its associated components. In general, cryptography
is used to protect data while it is being communicated between two points or
while it is stored in a medium vulnerable to physical theft. Communication
security provides protection to data by enciphering it at the transmitting
point and deciphering it at the receiving point. File security provides
protection to data by enciphering it when it is recorded on a storage medium
and deciphering it when it is read back from the storage medium. In the
first case, the key must be available at the transmitter and receiver
simultaneously during communication. In the second case, the key must be
maintained and accessible for the duration of the storage period. FIPS 171
provides approved methods for managing the keys used by the algorithm
specified in this standard.
8. Implementations. Cryptographic modules which implement this standard
shall conform to the requirements of FIPS 140-1. The algorithm specified in
this standard may be implemented in software, firmware, hardware, or any
combination thereof. The specific implementation may depend on several
factors such as the application, the environment, the technology used, etc.
Implementations which may comply with this standard include electronic
devices (e.g., VLSI chip packages), micro-processors using Read Only Memory
(ROM), Programmable Read Only Memory (PROM), or Electronically Erasable Read
Only Memory (EEROM), and mainframe computers using Random Access Memory
(RAM). When the algorithm is implemented in software or firmware, the
processor on which the algorithm runs must be specified as part of the
validation process. Implementations of the algorithm which are tested and
validated by NIST will be considered as complying with the standard. Note
that FIPS 140-1 places additional requirements on cryptographic modules for
Government use. Information about devices that have been validated and
procedures for testing and validating equipment for conformance with this
standard and FIPS 140-1 are available from the National Institute of
Standards and Technology, Computer Systems Laboratory, Gaithersburg, MD
20899.
9. Export Control. Cryptographic devices and technical data regarding them
are subject to Federal Government export controls as specified in Title 22,
Code of Federal Regulations, Parts 120 through 128. Some exports of
cryptographic modules implementing this standard and technical data
regarding them must comply with these Federal regulations and be licensed by
the U.S. Department of State. Other exports of cryptographic modules
implementing this standard and technical data regarding them fall under the
licensing authority of the Bureau of Export Administration of the U.S.
Department of Commerce. The Department of Commerce is responsible for
licensing cryptographic devices used for authentication, access control,
proprietary software, automatic teller machines (ATMs), and certain devices
used in other equipment and software. For advice concerning which agency has
licensing authority for a particular cryptographic device, please contact
the respective agencies.
10. Patents. Cryptographic devices implementing this standard may be covered
by U.S. and foreign patents issued to the International Business Machines
Corporation. However, IBM has granted nonexclusive, royalty-free licenses
under the patents to make, use and sell apparatus which complies with the
standard. The terms, conditions and scope of the licenses are set out in
notices published in the May 13, 1975 and August 31, 1976 issues of the
Official Gazette of the United States Patent and Trademark Office (934 O.G.
452 and 949 O.G. 1717).
11. Alternative Modes of Using the DES. FIPS PUB 81, DES Modes of Operation,
describes four different modes for using the algorithm described in this
standard. These four modes are called the Electronic Codebook (ECB) mode,
the Cipher Block Chaining (CBC) mode, the Cipher Feedback (CFB) mode, and
the Output Feedback (OFB) mode. ECB is a direct application of the DES
algorithm to encrypt and decrypt data; CBC is an enhanced mode of ECB which
chains together blocks of cipher text; CFB uses previously generated cipher
text as input to the DES to generate pseudorandom outputs which are combined
with the plaintext to produce cipher, thereby chaining together the
resulting cipher; OFB is identical to CFB except that the previous output of
the DES is used as input in OFB while the previous cipher is used as input
in CFB. OFB does not chain the cipher.
12. Implementation of this standard. This standard became effective July
1977. It was reaffirmed in 1983, 1988, and 1993. It applies to all Federal
agencies, contractors of Federal agencies, or other organizations that
process information (using a computer or telecommunications system) on
behalf of the Federal Government to accomplish a Federal function. Each
Federal agency or department may issue internal directives for the use of
this standard by their operating units based on their data security
requirement determinations. FIPS 46-2 which revises the implementation of
the Data Encryption Algorithm to include software, firmware, hardware, or
any combination thereof, is effective June 30, 1994. This revised standard
may be used in the interim period before the effective date.
NIST provides technical assistance to Federal agencies in implementing data
encryption through the issuance of guidelines and through individual
reimbursable projects. The National Security Agency assists Federal
departments and agencies in communications security for classified
applications and in determining specific security requirements. Instructions
and regulations for procuring data processing equipment utilizing this
standard are included in the Federal Information Resources Management
Regulation (FIRMR) Subpart 201-8.111-1.
13. Specifications. Federal Information Processing Standard (FIPS) 46-2,
Data Encryption Standard (DES) (affixed).
14. Cross Index.
a. Federal Information Resources Management Regulations (FIRMR) subpart
201.20.303, Standards, and subpart 201.39.1002, Federal Standards.
b. FIPS PUB 31, Guidelines to ADP Physical Security and Risk Management.
c. FIPS PUB 41, Computer Security Guidelines for Implementing the
Privacy Act of 1974.
d. FIPS PUB 65, Guideline for Automatic Data Processing Risk Analysis.
e. FIPS PUB 73, Guidelines for Security of Computer Applications.
f. FIPS PUB 74, Guidelines for Implementing and Using the NBS Data
Encryption Standard.
g. FIPS PUB 81, DES Modes of Operation.
h. FIPS PUB 87, Guidelines for ADP Contingency Planning.
i. FIPS PUB 112, Password Usage.
j. FIPS PUB 113, Computer Data Authentication.
k. FIPS PUB 140-1, Security Requirements for Cryptographic Modules.
l. FIPS PUB 171, Key Management Using ANSI X9.17.
m. Other FIPS and Federal Standards are applicable to the implementation
and use of this standard. In particular, the Code for Information
Interchange, Its Representations, Subsets, and Extensions (FIPS PUB 1-2)
and other related data storage media or data communications standards
should be used in conjunction with this standard. A list of currently
approved FIPS may be obtained from the National Institute of Standards
and Technology, Computer Systems Laboratory, Gaithersburg, MD 20899.
15. Qualifications. The cryptographic algorithm specified in this standard
transforms a 64-bit binary value
Если Вам нужна помощь с академической работой (курсовая, контрольная, диплом, реферат и т.д.),
обратитесь к нашим специалистам. Более 90000 специалистов готовы Вам помочь.
Бесплатные корректировки и доработки. Бесплатная оценка стоимости работы.
Нужна помощь в написании работы?
Мы - биржа профессиональных авторов (преподавателей и доцентов вузов). Пишем статьи РИНЦ, ВАК, Scopus.
Помогаем в публикации. Правки вносим бесплатно.