Xreferat.com » Рефераты по информатике и программированию » Система криптозащиты в стандарте DES. Система взаимодействия периферийных устройств
Система криптозащиты в стандарте DES. Система взаимодействия периферийных устройств
into a unique 64-bit binary value based on
a 56-bit variable. If the complete 64-bit input is used (i.e., none of the
input bits should be predetermined from block to block) and if the 56-bit
variable is randomly chosen, no technique other than trying all possible
keys using known input and output for the DES will guarantee finding the
chosen key. As there are over 70,000,000,000,000,000 (seventy quadrillion)
possible keys of 56 bits, the feasibility of deriving a particular key in
this way is extremely unlikely in typical threat environments. Moreover, if
the key is changed frequently, the risk of this event is greatly diminished.
However, users should be aware that it is theoretically possible to derive
the key in fewer trials (with a correspondingly lower probability of success
depending on the number of keys tried) and should be cautioned to change the
key as often as practical. Users must change the key and provide it a high
level of protection in order to minimize the potential risks of its
unauthorized computation or acquisition. The feasibility of computing the
correct key may change with advances in technology.
A more complete description of the strength of this algorithm against
various threats is contained in FIPS PUB 74, Guidelines for Implementing and
Using the NBS Data Encryption Standard.
When correctly implemented and properly used, this standard will provide a
high level of cryptographic protection to computer data. NIST, supported by
the technical assistance of Government agencies responsible for
communication security, has determined that the algorithm specified in this
standard will provide a high level of protection for a time period beyond
the normal life cycle of its associated equipment. The protection provided
by this algorithm against potential new threats will be reviewed within 5
years to assess its adequacy (See Special Information Section). In addition,
both the standard and possible threats reducing the security provided
through the use of this standard will undergo continual review by NIST and
other cognizant Federal organizations. The new technology available at that
time will be evaluated to determine its impact on the standard. In addition,
the awareness of any breakthrough in technology or any mathematical weakness
of the algorithm will cause NIST to reevaluate this standard and provide
necessary revisions.
At the next review (1998), the algorithm specified in this standard will be
over twenty years old. NIST will consider alternatives which offer a higher
level of security. One of these alternatives may be proposed as a
replacement standard at the 1998 review.
16. Comments. Comments and suggestions regarding this standard and its use
are welcomed and should be addressed to the National Institute of Standards
and Technology, Attn: Director, Computer Systems Laboratory, Gaithersburg,
MD 20899.
17. Waiver Procedure. Under certain exceptional circumstances, the heads of
Federal departments and agencies may approve waivers to Federal Information
Processing Standards (FIPS). The head of such agency may redelegate such
authority only to a senior official designated pursuant to section 3506(b)
of Title 44, United States Code. Waiver shall be granted only when:
a. Compliance with a standard would adversely affect the accomplishment
of the mission of an operator of a Federal computer system; or
b. Compliance with a standard would cause a major adverse financial
impact on the operator which is not offset by Government-wide savings.
Agency heads may act upon a written waiver request containing the
information detailed above. Agency heads may also act without a written
waiver request when they determine that conditions for meeting the standard
cannot be met. Agency heads may approve waivers only by a written decision
which explains the basis on which the agency head made the required
finding(s). A copy of each decision, with procurement sensitive or
classified portions clearly identified, shall be sent to: National Institute
of Standards and Technology; ATTN: FIPS Waiver Decisions, Technology
Building, Room B-154, Gaithersburg, MD 20899.
In addition, notice of each waiver granted and each delegation of authority
to approve waivers shall be sent promptly to the Committee on Government
Operations of the House of Representatives and the Committee on Government
Affairs of the Senate and shall be published promptly in the Federal
Register.
When the determination on a waiver applies to the procurement of equipment
and/or services, a notice of the waiver determination must be published in
the Commerce Business Daily as a part of the notice of solicitation for
offers of an acquisition or, if the waiver determination is made after that
notice is published, by amendment to such notice.
A copy of the waiver, any supporting documents, the document approving the
waiver and any accompanying documents, with such deletions as the agency is
authorized and decides to make under 5 United States Code Section 552(b),
shall be part of the procurement documentation and retained by the agency.
18. Special Information. In accordance with the Qualifications Section of
this standard, reviews of this standard have been conducted every 5 years
since its adoption in 1977. The standard was reaffirmed during each of those
reviews. This revision to the text of the standard contains changes which
allow software implementations of the algorithm and which permit the use of
other FIPS approved cryptographic algorithms.
19. Where to Obtain Copies of the Standard. Copies of this publication are
for sale by the National Technical Information Service, U.S. Department of
Commerce, Springfield, VA 22161. When ordering, refer to Federal Information
Processing Standards Publication 46-2 (FIPS PUB 46-2), and identify the
title. When microfiche is desired, this should be specified. Prices are
published by NTIS in current catalogs and other issuances. Payment may be
made by check, money order, deposit account or charged to a credit card
accepted by NTIS.
FIPS PUB 44-2
Supersedes FIPS PUB 46-1
1988 January 22
Federal Information
Processing Standards Publication 46-2
1993 December 30
Specifications for
DATA ENCRYPTION STANDARD
The Data Encryption Standard (DES) shall consist of the following Data
Encryption Algorithm to be implemented in special purpose electronic
devices. These devices shall be designed in such a way that they may be used
in a computer system or network to provide cryptographic protection to
binary coded data. The method of implementation will depend on the
application and environment. The devices shall be implemented in such a way
that they may be tested and validated as accurately performing the
transformations specified in the following algorithm.
DATA ENCRYPTION ALGORITHM
Introduction
The algorithm is designed to encipher and decipher blocks of data consisting
of 64 bits under control of a 64-bit key.** Deciphering must be accomplished
by using the same key as for enciphering, but with the schedule of
addressing the key bits altered so that the deciphering process is the
reverse of the enciphering process. A block to be enciphered is subjected to
an initial permutation IP, then to a complex key-dependent computation and
finally to a permutation which is the inverse of the initial permutation
IP-1. The key-dependent computation can be simply defined in terms of a
function f, called the cipher function, and a function KS, called the key
schedule. A description of the computation is given first, along with
details as to how the algorithm is used for encipherment. Next, the use of
the algorithm for decipherment is described. Finally, a definition of the
cipher function f is given in terms of primitive functions which are called
the selection functions Si and the permutation function P. Si, P and KS of
the algorithm are contained in the Appendix.
The following notation is convenient: Given two blocks L and R of bits, LR
denotes the block consisting of the bits of L followed by the bits of R.
Since concatenation is associative, B1B2...B8, for example, denotes
a 56-bit variable. If the complete 64-bit input is used (i.e., none of the
input bits should be predetermined from block to block) and if the 56-bit
variable is randomly chosen, no technique other than trying all possible
keys using known input and output for the DES will guarantee finding the
chosen key. As there are over 70,000,000,000,000,000 (seventy quadrillion)
possible keys of 56 bits, the feasibility of deriving a particular key in
this way is extremely unlikely in typical threat environments. Moreover, if
the key is changed frequently, the risk of this event is greatly diminished.
However, users should be aware that it is theoretically possible to derive
the key in fewer trials (with a correspondingly lower probability of success
depending on the number of keys tried) and should be cautioned to change the
key as often as practical. Users must change the key and provide it a high
level of protection in order to minimize the potential risks of its
unauthorized computation or acquisition. The feasibility of computing the
correct key may change with advances in technology.
A more complete description of the strength of this algorithm against
various threats is contained in FIPS PUB 74, Guidelines for Implementing and
Using the NBS Data Encryption Standard.
When correctly implemented and properly used, this standard will provide a
high level of cryptographic protection to computer data. NIST, supported by
the technical assistance of Government agencies responsible for
communication security, has determined that the algorithm specified in this
standard will provide a high level of protection for a time period beyond
the normal life cycle of its associated equipment. The protection provided
by this algorithm against potential new threats will be reviewed within 5
years to assess its adequacy (See Special Information Section). In addition,
both the standard and possible threats reducing the security provided
through the use of this standard will undergo continual review by NIST and
other cognizant Federal organizations. The new technology available at that
time will be evaluated to determine its impact on the standard. In addition,
the awareness of any breakthrough in technology or any mathematical weakness
of the algorithm will cause NIST to reevaluate this standard and provide
necessary revisions.
At the next review (1998), the algorithm specified in this standard will be
over twenty years old. NIST will consider alternatives which offer a higher
level of security. One of these alternatives may be proposed as a
replacement standard at the 1998 review.
16. Comments. Comments and suggestions regarding this standard and its use
are welcomed and should be addressed to the National Institute of Standards
and Technology, Attn: Director, Computer Systems Laboratory, Gaithersburg,
MD 20899.
17. Waiver Procedure. Under certain exceptional circumstances, the heads of
Federal departments and agencies may approve waivers to Federal Information
Processing Standards (FIPS). The head of such agency may redelegate such
authority only to a senior official designated pursuant to section 3506(b)
of Title 44, United States Code. Waiver shall be granted only when:
a. Compliance with a standard would adversely affect the accomplishment
of the mission of an operator of a Federal computer system; or
b. Compliance with a standard would cause a major adverse financial
impact on the operator which is not offset by Government-wide savings.
Agency heads may act upon a written waiver request containing the
information detailed above. Agency heads may also act without a written
waiver request when they determine that conditions for meeting the standard
cannot be met. Agency heads may approve waivers only by a written decision
which explains the basis on which the agency head made the required
finding(s). A copy of each decision, with procurement sensitive or
classified portions clearly identified, shall be sent to: National Institute
of Standards and Technology; ATTN: FIPS Waiver Decisions, Technology
Building, Room B-154, Gaithersburg, MD 20899.
In addition, notice of each waiver granted and each delegation of authority
to approve waivers shall be sent promptly to the Committee on Government
Operations of the House of Representatives and the Committee on Government
Affairs of the Senate and shall be published promptly in the Federal
Register.
When the determination on a waiver applies to the procurement of equipment
and/or services, a notice of the waiver determination must be published in
the Commerce Business Daily as a part of the notice of solicitation for
offers of an acquisition or, if the waiver determination is made after that
notice is published, by amendment to such notice.
A copy of the waiver, any supporting documents, the document approving the
waiver and any accompanying documents, with such deletions as the agency is
authorized and decides to make under 5 United States Code Section 552(b),
shall be part of the procurement documentation and retained by the agency.
18. Special Information. In accordance with the Qualifications Section of
this standard, reviews of this standard have been conducted every 5 years
since its adoption in 1977. The standard was reaffirmed during each of those
reviews. This revision to the text of the standard contains changes which
allow software implementations of the algorithm and which permit the use of
other FIPS approved cryptographic algorithms.
19. Where to Obtain Copies of the Standard. Copies of this publication are
for sale by the National Technical Information Service, U.S. Department of
Commerce, Springfield, VA 22161. When ordering, refer to Federal Information
Processing Standards Publication 46-2 (FIPS PUB 46-2), and identify the
title. When microfiche is desired, this should be specified. Prices are
published by NTIS in current catalogs and other issuances. Payment may be
made by check, money order, deposit account or charged to a credit card
accepted by NTIS.
FIPS PUB 44-2
Supersedes FIPS PUB 46-1
1988 January 22
Federal Information
Processing Standards Publication 46-2
1993 December 30
Specifications for
DATA ENCRYPTION STANDARD
The Data Encryption Standard (DES) shall consist of the following Data
Encryption Algorithm to be implemented in special purpose electronic
devices. These devices shall be designed in such a way that they may be used
in a computer system or network to provide cryptographic protection to
binary coded data. The method of implementation will depend on the
application and environment. The devices shall be implemented in such a way
that they may be tested and validated as accurately performing the
transformations specified in the following algorithm.
DATA ENCRYPTION ALGORITHM
Introduction
The algorithm is designed to encipher and decipher blocks of data consisting
of 64 bits under control of a 64-bit key.** Deciphering must be accomplished
by using the same key as for enciphering, but with the schedule of
addressing the key bits altered so that the deciphering process is the
reverse of the enciphering process. A block to be enciphered is subjected to
an initial permutation IP, then to a complex key-dependent computation and
finally to a permutation which is the inverse of the initial permutation
IP-1. The key-dependent computation can be simply defined in terms of a
function f, called the cipher function, and a function KS, called the key
schedule. A description of the computation is given first, along with
details as to how the algorithm is used for encipherment. Next, the use of
the algorithm for decipherment is described. Finally, a definition of the
cipher function f is given in terms of primitive functions which are called
the selection functions Si and the permutation function P. Si, P and KS of
the algorithm are contained in the Appendix.
The following notation is convenient: Given two blocks L and R of bits, LR
denotes the block consisting of the bits of L followed by the bits of R.
Since concatenation is associative, B1B2...B8, for example, denotes
Если Вам нужна помощь с академической работой (курсовая, контрольная, диплом, реферат и т.д.),
обратитесь к нашим специалистам. Более 90000 специалистов готовы Вам помочь.
Бесплатные корректировки и доработки. Бесплатная оценка стоимости работы.
Нужна помощь в написании работы?
Мы - биржа профессиональных авторов (преподавателей и доцентов вузов). Пишем статьи РИНЦ, ВАК, Scopus.
Помогаем в публикации. Правки вносим бесплатно.