Development of technology of crude smoked sausage
Protein "PP500E" and meat pulverized using cup-shaped cutter 4 for fine grinding and preparing meat. To a syringe machine 5 beef shipped in outdoor carts that are using the lift to unload hopper syringe. In this case, the molding meat loaves made by hand in cutting the shell with one end, followed by items made up of hand-knitted twine sticks on conveyor table 6 and dumping them into sausage frame 7.
Shaping the manufacture of sausage casings of roll material is carried out on sausages unit 8.
After mating, or
overlay hinges sticks hung on sticks, which are then placed on the
frame 7 and sent to the heat chamber 9 for heat treatment
(precipitation). Next sausage sent to a smoking device 10, and after
subjected to drying 11.
During ripening and drying in the minced
meat is a few important changes. These include changes in the number
of different species of bacteria, physical changes, such as changes
in pH and moisture content, as well as chemical changes, such as
gidralisation protein into amino acids and ammonia.
3.3 Technology introductions of protein of software 500Е
Owing to wide assortment of this kind of production I have chosen modern technology with protein introduction «Purin 500Е» and with use of bacterial ferments on purpose to provide a controllable fast fermentation the Product should be ready to realization in 21 days, but it, basically, depends on diameter of a cover.
First, I will stop on a method of introduction of protein «PP 500Е» in crude smoked sausages.
The maximum advantage gives addition «software 500Е» in the form of gel of squirrels: water with a parity of squirrels: water equal 1:3,5 — 1:4. The technique consists in the following:
— «PP 550Е» crush Squirrels in cutter in the presence of 3,5-4 parts of water before full hydration (about 1-2 minutes). The weight turns out smooth shining porridge formed.
— to this gel add blood in quantity approximately 2 % on purpose to compensate color. Good way is also heart crushing together with gel. Heart provides good pigmentation, is high-quality offal, raises profitability of manufacture. In this case heart is used in number of 10-20 %.
Gel can be painted also, adding the natural painted spices, for example, a paprika.
— at last, in cutter enter 2-3 % of salt and 70-150 mg/kg of nitrite.
The above-stated technique provides reception of strong gel which can be stored in refrigerating conditions (to +2 OS) during the certain period of time, or it can be frozen.
Approximately 5-12 % of the gel received thus can be entered into mincemeat that gives the chance to save meat raw materials and to raise profitability of manufacture.
In the table 2 the compounding resulted on this slide can be example of compounding of the crude smoked fermented sausage [13].
Table 2
The recipe of dry fermented sausages.
| Recipe: | kg |
| Lean pork | 27 |
| Lean beef | 27 |
| Fatback | 34 |
| Gel protein "PP 500E" in water | 12 |
| Total | 100 |
| Salts | 2,5 |
| Nitrite | 0,014 |
| Ascorbic acid | 0,10 |
| Sugars | 1,5 |
| Seasonings | arbitrarily |
The protein content of "PP 500E" in the final product is 2%.
Preparation recipe of gel is shown in the table 3.
Table 3.
Recipe of gel
| Recipe gel: | kg |
| «PP 500Е» | 2 |
| Water | 7,8 |
| Pig heart | 2 |
| A mixture of 95% salt and 5% nitrite | 0,2 |
| Nitrite | 0,001 |
| Total | 12,0 |
3.4 Grocery calculation dry enzymatic sausages
Schedule of workshops based on the chart entry of raw materials, by labor law of RK, it takes into account the valuation of the working day workers. Number of shifts per day -2, the shop is working all the time, as the raw material arrives every shift.
Table 4
Schedule workshops

Table 5
Recipe of dry enzymatic sausage
| Recipe: | kg |
| Not fat of beef | 27 |
| Not fat of pork | 27 |
| Fat of pork | 34 |
| Gel of protein «PP 500Е» in water | 12 |
| Total | 100 |
At performance of calculations of sausage manufacture choose group assortment, and then a compounding under each name of a product. And it is necessary to consider that the compounding is resulted in kg on 100 kg of the unsalted raw materials, each name has the standard exit. At development of sausages with various additives of norm of the expense and an exit of the beef product will differ from traditional technology. The assortment of sausages is necessary for selecting so that to keep an optimum parity of indicators of a rating trimming meat in reserve salting branch and its expense on manufacture of sausages.
The requirement for the basic raw materials for manufacturing of sausages is defined by each kind of sausages according to a compounding and norm of an exit of finished goods.
The total mass of the main raw material, kg:
=
(1)
=2000
100/120=1666(kg)
Where
- the
mass of
the
planned
release
of
sausages
of
each type
of
shift,
kg;
В
– output of finished goods, % to weight of unsalted raw
materials. .
The output values of finished products B for every type of product are presented in standard documentation for certification, collections of normative parameters, the output of production and consumption of raw materials, operating in the meat industry and duly approved.
Necessary quantity of the basic raw materials by kinds in shift:
=
(2)
(beef)=1666
/100=
449(kg) (2.1)
(pock)=1666
/100=
449(kg) (2.2)
(fat)=1666
/100=
566(kg) (2.3)
(gel)=1666
/100=
200(kg) (2.4)
Where К – Norm of the expense of raw materials according to a compounding on 100 kg of the basic raw materials, kg.
At cutting, a boning and trimming meat allocate bones, veins and sinews.
At drawing up of material balance it is necessary to define actual weight of secondary raw materials, technical preliminary and losses under the formula and according to standard exits of these raw materials. Norms of gathering of secondary raw materials at cutting of hulks are presented in the appendix. Results of calculations make out in the form of the table.
Each kind of sausages are syringe in a cover of strictly specified kind and diameter requirement in which count proceeding from norms of the expense of a cover on 1t crude smoked sausages. For definition of the expense of a cover on all volume of developed assortment of sausage products it is necessary to result all release of products in group assortment in group crude smoked sausages on reduction factors.
Demand in a twinning:
Пt=М
jt
(3)
Пt=2
1=2(kg),
Where M is mass of output of product, t; j is norm expenses of twinning, kg/t.
Demand in a shell by diameter 60mm:
ПК60=МСКК
КCSS
j60
(4)
ПК60=2000
=1067200(m)
Where ПК60 - the need for artificial shell diameter of 60 mm;МCSS – mass of output raw sausages, kg. КCSS – factor to bring the crude smoked sausage to cooked; j60 – norm of expenses of artificial membranes with a diameter of 60 mm for the production of cooked sausages, m / t.
Table 6
Requirement for raw materials
| Expenses of raw material | |||||
| № | Raw material |
Norm of expenses of raw material |
In a shift, kg | In a day, kg | In a year, t |
| 1 | Not fat of beef | 56 | 449 | 898 | 269,4 |
| 2 | Not fat of pork | 56 | 449 | 898 | 269,4 |
| 3 | Fat of pork | 71 | 566 | 1132 | 339,6 |
| 4 | Gel of protein «PP 500Е» in water | 25 | 200 | 400 | 240 |
Table 7
Capacity workshop by output of production
| In 1 shift | 2 t |
| In a day | 4 t |
| In a year | 1200 t |
4 Requirements for the finished product
As shown in the table 8 sausage products, as well as other meat products, are mainly protein sources, therefore their nutritional value should be defined both the general maintenance of proteins, and quantity of high-grade proteins. The quantity of fat should be in limits at which quality indicators of sausages (taste, a consistence improve) as in excessive considerable quantities fat worsens flavoring advantages of products and their comprehensibility. At drawing up of compoundings of sausages also should be considered the maintenance in finished goods of irreplaceable fat polynonsaturated acids, macro- and microcells, vitamins and comprehensibility.
Table 8
Chemical composition of meat products
| Product Name | Mass% |
Energy value KJ/100г |
|||
| Water | Proteins | Fats | Carbohydrates | ||
| Cooked sausage | 55-72 | 10-14 | 14-30 | 1-3,1 | 711-1322 |
| Semi smoked sausage | 40-52 | 18-23 | 15-45 | 4,3-4,9 | 1084-1950 |
| Boiled-smoked sausage | 39-40 | 17-28 | 27-39 | 4,6-4,7 | 1506-1757 |
| Crude smoked sausage | 25-30 | 21-28 | 42-48 | 6,0-6,6 | 1979-2151 |
| Liver sausage and pate | 50-70 | 10-16 | 15-35 | 2,0-3,0 | 1220-1760 |
| Zelec | 50-80 | 10-16 | 10-30 | 2,0-3,0 | 838-1676 |
Established that for cooked sausages minimum amount of protein should be in the range of 10 to 12%, collagen content - not more than 15% of total protein, fat - no more than 30% moisture content - not more than four times the amount of protein, plus 10% added water [14].
According to Gorlov [15], the design of new types of meat products, especially, should take into account the fact that food is not only a source of energy, but also plastic materials, it is necessary for construction and renovation of the protein structures of the body, as well as vitamins and minerals salts, which are essential for normal variables processes. Introduced into the sausage vegetable proteins in combination with the animals to be active in biological relative amino acid complexes, providing a physiological usefulness and high digestibility of amino acids in the intracellular accurate synthesis.
Thus, the sausages should be worked out with the set chemical composition on the content of protein, fat, moisture and other substances by selection of raw materials and best manufacturing technology.
4.1 Requirements for quality meat products
sausages enzymatic dry defect
Quality control of finished products is carried out in a certified laboratory of sanitary epidemic station and the regional veterinary laboratory. The laboratory conducted the organoleptic and physical-chemical tests on samples of sausages of each batch of products.
Sampling of products is carried out according to GOST 9792-73 "Sausage and pork products, mutton, beef and other kinds of slaughtered animals and birds. Acceptance rules and sampling methods.
Organoleptic research is carried out according to GOST 9959-91 "meat products. General terms of organoleptic evaluation.
Loaves
of all types of sausages must be clean, dry, no damage shell, stains,
slips and the influx of meat wrappers should fit snugly inside the
stuffing.
Cooked and smoked sausages should be elastic
consistency,
in the context of beef cooked sausages should be pink or pale pink,
well-mixed, it is uniformly distributed pieces of bacon or language
of a certain size. Minced smoked, boiled-smoked, smoked and good
sausage should be pink to dark red, with no gray spots, voids, and
contain pieces of fat white or white with a pinkish tint. Tolerance
of individual pieces of yellowed speck in accordance with technical
requirements for each type of sausage
Smell and taste of meat products must comply with this type of product, the aroma of spices should be well defined, of extraneous odors and flavors must be absent, smoked, boiled-smoked and smoked - slightly spicy, moderately saline (smoked - brackish), with a pronounced smoke flavor.
Benign sausage must comply with standards in size, shape and binding of loaves.
Are not allowed to implement the sausages:
1. with contamination on the shell;
2. with bursting or broken loaves
3. with a loose ground meat;
4. with the influx of meat over the shell (violating the integrity of the loaf), or slip on the premium sausages - longer than 5 cm, sausages 1st grade - longer than 10 cm, sausages 2nd grade - longer than 30 cm;
5. with the presence of gray spots and large voids;
6. with the presence of a broth-fat edema: a sausage premium of more than 2 cm, sausages in the 1st and 2nd grade - more than 5 cm
In the sausage regulated mass fraction of moisture, Popov-rennoy salt, sodium nitrite and starch.
Mass fraction of salt in the sausage must not exceed: a semi - no more than 4,5%.
Maximum content of residual nitrite in smoked sausages should not exceed
0,003%, the rest - 0,005%.
Mass fraction of moisture in the semi - 35-47%, boiled-smoked - 38-40%.
In the sausages are not allowed the presence of coliform bacteria (coliforms) and Staphylococcus aureus in 1 g, sulfidredutsiruyuschih Clostridia - in 0,01, pathogens, including salmonella - 25 g [16].
Content in the sausage of toxic elements, aflatoxin B1, nitrosamines. hormones and pesticides must not exceed the permissible levels established by medical and biological requirements and sanitary norms of quality food raw materials and food Ministry of Health of the Republic of Kazakhstan [17].
4.2 Faults and defects of sausages
Spoilage of sausages called mainly the growth of microorganisms in their production process in violation of or noncompliance with technology Institute of storage conditions.
In sausages usually are cocci, bacteria group Subtilis Mesentericus and other typical feedstock. On the outside of the surface of the loaves are deposited microorganisms, under whose influence the shell sausages are moist, sticky and is moistened stuffing [18].
The main defects that arise in violation of