Xreferat.com » Рефераты по менеджменту » The manager as a teacher: selected aspects of stimulation of scientsfsc thinking
The manager as a teacher: selected aspects of stimulation of scientsfsc thinking
organism in quiescence state or at their peak load
condition. But, after all, the problems of patients are not those
associated with their status in quiescence state, and the level of
their daily normal (routine) load is not their maximum load. For
normal evaluation of the functional condition of the patient’s
organism it is necessary to use not tabular data of due values, but
due curves of functions of the body systems which nowadays are almost
not applied. Coincidence or non-coincidence of actual curves of the
body systems’ functions with due curves would be a criterion of
their sufficiency or insufficiency. Hence, application of standard
tables is insufficient and does not meet the requirements of adequate
diagnostics. Application of due curves is more of informative
character (see below). Statistical mathematical models do not provide
such accuracy, howsoever exact we measure parameters. They show what
values of parameters should be in a certain group of subjects alike
in terms of certain properties, for example, males aged 20-30 years,
of 165-175 cm height, smokers or non-smokers, married or single,
paleface, yellow- or black-skinned, etc. Statistical models are much
simpler than those determined, but less exact though, since in
relation to the given subject we can only know something with certain
degree (e.g. 80%) of probability. Statistical models apply when we do
not know all elements of the system and laws of their interaction.
Then we hunt for similar systems on the basis of significant
features, we somewise measure the results of action of all these
systems operating in similar conditions (clinical tests) and
calculate mean value of the result of action. Having assumed that the
given subject closely approximates the others, because otherwise
he/she would not be similar to them, we say: “Once these
(people) have such-and-such parameters of the given system in
such-and-such conditions and they live without any problems, then
he/she should have these same parameters if he/she is in the same
conditions”. However, a subject’s living conditions do
always vary. Change or failure to account even one significant
parameter can change considerably the results of statistical
researches, and this is a serious drawback of statistical
mathematical models. Moreover, statistical models often do not reveal
the essence of pathological process at all. The functional residual
capacity (FRC) of lungs shows volume of lungs in the end of normal
exhalation and is a certain indicator of the number of functional
units of ventilation (FUV). Hence, the increase in FRC indicates the
increase in the number FUV? But in patients with pulmonary emphysema
FRC is considerably oversized. All right then, does this mean that
the number of FUV in such patients is increased? It is nonsense, as
we know that due to emphysema destruction of FUV occurs! And in
patients with insufficiency of pumping function of left ventricle
reduction of FRC is observed. Does this mean that the number of FUV
is reduced in such patients? It is impossible to give definite answer
to these questions without the knowledge of the dynamics of external
respiration system function and pulmonary blood circulation. Hence,
the major drawback of statistical models consists in that
sufficiently reliable results of researches can be obtained only in
the event that all significant conditions defining the given group of
subjects are strictly observed. Alteration or addition of one or
several significant conditions of research, for example,
stature/height, sex, weight, the colour of eyes, open window during
sleep, place of residence, etc., may alter very much the final result
by adding a new group of subjects. As a result, if we wish to know,
e.g. vital capacity
of lungs in the inhabitants of New York we must conduct research
among the inhabitants of New York rather than the inhabitants of
Moscow, Paris or Beijing, and these data may not apply, for example,
to the inhabitants of Rio de Janeiro. Moreover, standards/norms may
differ in
the inhabitants of different areas of New York depending on
national/ethnic/
identity, environmental pollution in these areas, social level and
etc. Surely, one may investigate all conceivable variety of groups of
subjects and develop specifications/standards, for example, for males
aged from... to..., smokers or non-smokers of cigars (tobacco pipes,
cigarettes or cigarettes with cardboard holder) with high (low)
concentration of nicotine, aboriginals (emigrants), white, dark- or
yellow-skinned, etc. It would require enormous efforts and still
would not be justified, since the world is continually changing and
one would have to do this work every time again. It’s all the
more so impossible to develop statistical specifications/standards
for infinite number of groups of subjects in the course of dynamic
processes, for example, physical activities and at different phases
of pathological processes, etc., when the number of values of each
separate parameter is quite large. When the system’s details
are completely uncertain, although the variants of the system’s
reaction and their probabilistic weighting factors
are known,
statistical mathematical
model of system arises.
Inaccuracy of these models is of fundamental character and is
stipulated by probabilistic character of functions. In process of
studying of the system details of its structure become apparent. As a
result an empirical model emerges in the form of a formula. The
degree of accuracy of this model is higher than that of statistical,
but it is still of probabilistic character. When all details of the
system are known and the mechanism of its operation is entirely
exposed the deterministic mathematical
model appears in the form
of the formula. Its accuracy is only stipulated by the accuracy of
measurement methods. Application of statistical mathematical models
is justified at the first stages of any cognition process when
details of phenomenon in question are unknown. At this stage of
cognition a “black box” concept is introduced when we
know nothing about the structure of this “box”, but we do
know its reaction to certain influences. Types of its reactions are
revealed by means of statistical models and thereafter, with the help
of logic, details of its systems and their interaction are becoming
exposed. When all that is revealed, deterministic models come into
play and the evaluation of the systems’ functions is made not
on the basis of tabular data, but on the basis of due curve of the
system function. Due curve of a system’s function is a due
range of values of function of the given concrete system in the given
concrete subject, with its load varying from minimum to maximum.
Nowadays due curves are scarcely used, instead extreme minimum and
maximum due values are applied. For example, due ventilation
of lungs in quiescence
state and in the state of peak load. For this purpose maximum load is
given to individuals in homotypic groups and pulmonary ventilation in
quiescence state and in the state of peak load is measured. Following
statistical processing due values of pulmonary ventilation for the
conditions of rest and peak load are obtained. The drawback of
extreme due values consists in that this method is of little use
for the patients. Not all
patients are able to normally perform a stress test and discontinue
it long before due maximum value is achieved. The patient, for
example, could have shown due pulmonary ventilation, but he/she just
stopped the load test too early. How can the function be estimated
then? It can be only done by means of due curve. If the actual curve
coincides with the due curve, the function is normal at the site
where coincidence occurred. If actual curve is lower than the due
one, it is a lagging curve. Inclined straight line consisting of
vertical pieces of line is the due curve. Vertical dotted straight
line is the boundary of transition of normal or lagging function into
the inadequate line (a plateau). The drawback of due curves is that
in order to build them it is necessary to use deterministic
mathematical models of systems which number is currently very low.
They are built on the basis of knowledge of cause-and-effect
relationship between the system elements. These models are the most
complex, labor-consuming and for the time being are in many cases
impracticable. Therefore, these models are scarcely used
in the sphere of applied
medicine and this is the reason for the absence
of analytical medicine.
But they are the most accurate and show what parameters should be
present in the given concrete subject at any point of time. Only the
use of due curve functions allows for evaluating actual curves
properly. The difference of the deterministic mathematical models
from statistical tables consists in that in the first case due values
for the concrete given subject (the individual’s due values)
are obtained, while in the second case due values for the group of
persons alike the given subject are developed. The possibility of
building deterministic models depends only on the extent of our
knowledge of executive elements of the system and laws of their
interaction. Calculation of probability of a thrown stone hitting a
designated target can be drawn as an example of statistical standard
scale in the mechanic. After a series of throws, having made certain
statistical calculations it is possible to predict that the next
throw with such degree of probability will hit the mark. If
deterministic mathematical model (ballistics) is used for this
purpose, then knowing the stone weight, the force and the angle of
throw, viscosity of air, speed and direction of wind, etc., it is
possible to calculate and predict precisely the place where a stone
will fall. “Give me a spot of support and I will up-end the
globe”, said Archimedes, having in view that he had
deterministic mathematical model of mechanics of movements. Any
living organism is a very complex and multi-component system. It’s
impossible to account all parameters and their interrelations,
therefore statistical mathematical models cannot describe adequately
the condition of systems of organism. However, joint use of
statistical and deterministic models allows, with sufficient degree
of accuracy, to evaluate parameters of living system. In the lapse of
time in process of accumulation of knowledge statistical models are
replaced by deterministic. Engineering/technology
is much simpler than biology and medicine because the objects of its
knowledge are rather simple systems (machinery/vehicles) constructed
by a man. Therefore, its development and process of replacement of
statistical mathematical models for deterministic ones has made great
strides as compared with medicine. Nevertheless, on the front line of
any science including technical, where there is still no clarity
about many things and still a lot has to be learnt, statistics stands
its ground as it helps to reveal elements of systems and laws of
their interaction. What do we examine the subject and conduct
estimation of functions of the systems of his organism for? Do we do
it in order to know to which extent he/she differs from the
homothetic subject? Probably, yes. But, perhaps, the main objective
of examination of a patient is to determine whether he/she can
normally exist without medical aid and if not, what kind of help
might be provided. Pathological process is a process of destruction
of some SFU of the organism’s systems in which one of the key
roles is played by a vicious circle. However, vicious circles start
to actuate only if certain degree of load is present. They do not
emerge below this level and do not destroy SFU, i.e. no pathological
process emerges and no illness occurs below a certain threshold of
loading (mechanical, thermal, toxic, etc.). Hence, having defined a
threshold of the onset of the existence of vicious circle, we can
learn the upper “ceiling” of quality of life of the given
patient. If his/her living conditions (tempo of life) allow him/her
not to exceed this “ceiling”, it suggests that the given
subject will not be in poor health under these conditions. If the
tempo of life requires more than the capacity of his/her organism may
provide, he/she will be in poor health. In order not to be ill he/she
should stint himself/herself in some actions. To limit oneself in
actions means to reduce one’s living standard, to deprive
oneself of the possibility to undertake certain actions which others
can do or which he/she did earlier, but which are now inaccessible to
the given patient on the grounds of restricted resources of his/her
organism because of defects. If these restrictions have to do only
with pleasure/delight, such as, for example, playing football, this
may be somehow sustained. But if these restrictions have to do with
conditions of life of the patient it has to be somehow taken into
account. For example, if his/her apartment is located on the ground
floor, then to provide for quite normal way of life his/her maximum
consumption of О2 should be, e.g., 1000 ml a minute. But what
one should do if he/she lives, e.g., on the third floor and in the
house with no elevator, and to be able to get to the third floor on
foot he/she
should be able to take up 2000 ml/min О2, while he/she is able
to uptake take up only 1000 ml/min О2,? The patient would then
have a problem which can be solved only by means of some kind of
health care actions or by changing conditions of life. In clinical
practice we almost do not assess the patient’s functional
condition from the stand point of its correspondence to living
conditions.
Если Вам нужна помощь с академической работой (курсовая, контрольная, диплом, реферат и т.д.),
обратитесь к нашим специалистам. Более 90000 специалистов готовы Вам помочь.
Бесплатные корректировки и доработки. Бесплатная оценка стоимости работы.
Нужна помощь в написании работы?
Мы - биржа профессиональных авторов (преподавателей и доцентов вузов). Пишем статьи РИНЦ, ВАК, Scopus.
Помогаем в публикации. Правки вносим бесплатно.